Kisco Castings has been committed to providing quality steel to its customers for over 16 years. We here at Kisco understand that the steel we make today is used to build infrastructure you and we will use tomorrow. We have been consistently working towards improving our steelmaking facilities to control the chemistries of our final products. With our in-house expertise we have been able to manufacture wide variety of products ranging from alloy steel, spring steel, stainless steel, tool and die steel and other special steel conforming to ASTM, BS, DIN, GOST, JIS, IS in the form of ingot, rolled or forged form, rolls or casting.

1. Specification of Rolled Products   “Request a Quote”

- R.C Square (mm)	25-125
- R.C Square (mm)	16-156
- Flats (in mm)
o Width	30-300
o Thickness	6-35
- Forging Rounds(mm)	150-600mm

2. Specification of Forging Ingots    “Request a Quote”

SIZE SHAPE Min. Weight Per Mould (kg) 4 x 5 x 43 Square 110 5 x 6 x43 Square 165 6 x 7 x43 Square 230 7 x 8 x43 Square 285 8 x 9 x 43 Square 400 9 x 10 x 53 Square 600 10 x 11 x 53 Square 700 10 x 12 x 53 Square 800 11 x 14 x 66 Square 1400 13 x 15 x 66 Square 1700 14 x 16 x 66 Square 1850 17 x 20 x 66 Square 2300 18 x 21 x 66 Square 3050 19 x 22 x 66 Square 3200 22 x 25 x 66 Square 4050 23 x 26 x 66 Square 5350 26 x 31 x 68 Square 7000
	Ingots
	Forged bars
	Forged rounds

3. Specifications of Castings             “Request a Quote”

Kisco can manufacture single piece castings of upto 12MT and size upto 4000mm.

Grade	C	Mn	Si	S	P	Cr
IS-1030 (Grade I & III)	.20-.25	.80-1.40	.30-.50	.030	.030	-
IS-2708 (Grade I,II & III)	.20-.33	1.20-1.60	.30-.50	.035	.035	.15
IS-2707 (Grade I,II & III)	.39-.55	.60-1.50	.30-.50	.035	.035	-
IS-2644 (Grade I,II & III)	.17-.35	1.10-1.40	.30-.50	.035	.035	-

Having said that, we can manufacture any other grade as per your specific requirements.

4. Specifications for Tool & Die Steel   “Request a Quote”

A. D3 High Carbon High Chrome

	a.	Rounds Forged & Turned	60mm – 400mm
	b.	Flats Forged & Unturned	40 x 80 – 205-305

B. H11 & H13 Hot Die Steel

	a.	Rounds Forged & Turned	60mm – 400mm
	b.	Flats Forged & Unturned	40 x 80 – 205-305

C. M2 High Speed Steel Rounds

a.

60mm-155mm

D. M2 & D2 Flats as per customer requirements

All the above sizes are Ultrasonically Tested

5. Specifications for Rolls                   “Request a Quote”

Rolls in different grades and sizes ranging from 10” to 32” for rolling mills

C	Mn	Si	S Max	P Max	Cr	Mo	Ni	V Max	Shore Hardness
1.35-1.45	.55-.70	.45-.60	.035	.035	.75-1.05	.25-.35	1.00-1.25	.10	40°-45°
1.4-1.6	.60-.75	.50-.65	.035	.035	.8-1.1	.25-.35	1.00-1.25	.10	45°-50°
1.6-1.9	.65-.85	.60-.75	.035	.035;	1.1-1.4	.35-.45	.35-.45	.10	50°-55°

And traces of Boron are also present

C	Mn	Si	S Max	P Max	Cr	Mo	Ni	V Max	Shore Hardness
3.4-3.6	.50-.65	1.5-1.75	.015	.05	.50-.70	.40-.60	1.8-2.1	.10	55°-62°
3.5-3.7	.45-.55	1.7-1.9	.015	.05	.30-50	..30-.45	1.8-2.0	.10	50°-55°

C	Mn	Si	S Max	P Max	Cr	Mo	Ni	V Max	Shore Hardness
3.1-3.4	.40-.60	1.4-1.6	.01	.05	.40-.60	.80-1.0	3.0-3.5	.10	58°-70°

COMPOSITION OF GRADES:                    “Request a Quote”

Grade	C	Mn	Si	S (max)	P (max)	Cr	Ni	Mo
EN-1A	.07-.15>	.80-1.20	.10 Max	.20-.30	.070	-	-	-
EN-8	.35-.45	60-1.00	.10-.35	.050	.050	-	-	-
EN-9	.50-.60	.50-.80	.05-.35	.040	.040	-	-	-
EN-15B	.35-.40	1.1-1.3	.05-.35	.060	.060	-	-	-
EN-18	.35-.45	.60-.95	.10-.35	.040	.040	85-1.15	-	-
EN-19	.35-.45	.50-80	.10-.35	.040	.040	90-1.40	-	.20-.40
EN-24	35-.45	.45-.70	.10-.35	040.	.040	.90-1.40	1.3-1.8	.20,35
EN-25	.27-.35	.5O-.70	.10-.35	.040	.040	.50-.80	2.3-2.8	.40-.70
EN-31	.90-1.20	.30-.75	.10-.3.5	.040	.040	1.0-1.6	-	-
EN-36C	.12-.18	.30-.60	.10.35	.040	.040	.60-1.1	3.0-3.75	.10-.25
EN-39B	.12-.18	.50 max	.10-.35	.030	.030	1.0-1.40	3.80-4.50	.15-.35
EN-41B1	.35-.45	.6S max	.10-.45	.040	.040	1.5-1.8	.40 max.	.1O-.25
EN-42	.70-.85	.55-.75	.1O-.40	.040	.040	-	-	-
EN-44	.90-1.20	.45-.70	.15-.35	.040	.040	-	-	-
EN-45A	.55-.65	.70-1.0	1.7-2.0	.040	.040	-	-	-
60Si7	.56-.65	.70-1.00	1.5-2.0	.040	.040	-	-	-
EN-47	.45-.55	.50-.80	.50 max	.040	.040	.80-1.2	-	-
EN-351	.20 max	.60-1.0	.35 max	.040	.040	.40-.80	.60-1.0	.10 max
EN-353	.20 max	.5-1.0	.35 max	.040	.040	.75-1.25	1.0-1.5	.08-.15
EN-354	.20 max	.50-1.0	.3S max	.040	.040	.75-1.25	1.5-2.0	.10-.20
EN-355	.20 max	.40-.70	.35 max	.030	.030	1.40-1.70	1.8-2.2	.15-.25
31CrV32	.29-.33	.40-.60	.35 max	.040	.040	.40-.70	-	-
16MnCr5	.14-.19	1.0-1.3	.15-.40	.035	.035	.80-1.1	-	-
20MnCr5	.17-.22	1.1-1.4	.10-.35	.035	.035	1.0-1.3	-	-
SAE-4130	.28-.33	.40-.60	.15-.30	.040	.035	.80-1.1	-	.15-.25
SAE-4140	.38-.43	.75-1.0	.20-.35	.035	.035	.80-1.1	-	.15-.25
SAE-8620	.18-.23	.70-.90	.20-.35	.040	.040	.40-.60	.40-.70	.I 5-.25
SAE-8640	.37-.44	.70-1.05	.15-.30	.040	.040	.35-.65	.35-.75	.15-.25
SAE-52100	.95-1.1	.25-.40	.20-.35	.025	.025	1.3-1.6	-	-
ASTM 105	.20-.25	.90-1.0	.15-.35	.040	.040	-	-	-
ASTM 201	.18 max	1.1-1.3	.05-.35	.040	.040	-	-	-
Chisel Steel	.22-.28	.75-.85	.15-.35	.040	.040	1.2-1.3	.35-.40	.90-1.2
M-23	.78-.88	.20-.40	.20-.40	.025	.025	3.75-4.5	-	4.5-5.5
D-24	1.4 -1.6	.20-.50	.10-.80	.035	.035	11-13	.30	1.0
D-3	2.0-2.3	.25-.50	.35 max	.035	.035	11-12	.30	-
H-115	.30-.40	.25-.50	.80-1.2	.035	.035	4.7-5.25	.30	1.2-1.6
H-136	.30-.40	.20-.50	.80-1.2	.035	.035	4.5-5.5	.30	1.2-1.7

1 – (Al - .90-1.20)

2 – ( V - .07-.12)

3 – (V – 1.6-2.2, W – 5.5-6.5)

4 – (V – 0.5-1.1)

5 – (V - 0.30- 0.60)

6 – (V – 0.80 – 1.2)